05-04-2018, 12:44 AM
1, measure the moisture content of the floor
According to national standards, the moisture content of wood floors is 8%-13%. In fact, our country has a vast territory and different regions have different moisture content requirements. In the north of China,unique ideas for painting wood fences the floor water content is 12%, and in the south, the floor moisture content should also be controlled within 14%. Distributors of general wooden floors should have a water content meter. If they are not, they will not pay attention to the moisture content. At the time of purchase, the moisture content of the wooden floor selected in the exhibition hall shall be measured first,material for covering boat cabin entry stairs and then the moisture content of the wooden flooring of the same species and the same specifications of the unopened packaging shall be measured. If the difference is ±2%, the moisture content may be considered as qualified.
2. Observe the accuracy of wooden floor
After unpacking the wooden floor, 10 or so free hand-assembled units can be taken out. Observing the mouthpieces of the enterprises and assembling the gaps,cedar fencing vs vinyl fencing the height difference between adjacent boards can be obtained.
3, check the defects of the substrate
First check whether the same species, whether confusion, whether the floor dead, live, cracking, decay, bacteria and other defects. As for the color difference of the floor,hard easy maintenance wood flooring since the wooden floor is a natural wood product, there are objectively chromatic aberrations and non-uniform phenomena, which cannot be avoided. And the feeling of returning to nature after paving the solid wood floor is in its natural color and pattern. If excessive pursuit of the floor has no color difference,are composite interior door frames good it is unreasonable, as long as it can be adjusted slightly when paving.
4, select the board surface, paint quality
The key to look at the finish is the film finish, no bubbles, paint leakage, and abrasion resistance.
5, identify wood species
At present, the names of tree species on the market are very confusing. Due to the different growth environments of the wood, the materials of the same tree species are slightly different due to the origin,parquet flooring dubai ace hardware and the raw material prices are not the same. However, it is not the imported material that is better than the main material of the country. There are many kinds of trees in our country. With abundant resources, tree species in many regions are both good and the price is lower than that of similar imports. Some manufacturers promote the sale of wood with a variety of names that do not meet the science of wood, such as: cherry wood,outdoor playground borders rosewood, gold does not change, jade sandalwood and other names; what is more, low-grade high-grade wood, Consumers must not be confused by the name and make clear materials so as not to be fooled.
When buying wooden floors, it is best to buy brands with good reputation and high reputation. In addition to quality assurance, the products usually have a certain warranty period, and warping, deformation, cracking and other problems occur during the warranty period. Manufacturers responsible for repair, change, can remove the worries of consumers.
6, determine the appropriate length, width
Solid wood flooring is not the longer and the wider the better, it is recommended to choose the short length of the floor, not easy to deformation; length,groove living wall panels by bright green width of the wood floor is relatively easy to deform.
7, decided to lay the construction unit
The length of the floor life, in addition to the quality of the floor itself, the paving part is very important, so it is recommended that consumers buy which of the floor to please which laying,lest production companies and decoration companies to push each other responsibility.
According to national standards, the moisture content of wood floors is 8%-13%. In fact, our country has a vast territory and different regions have different moisture content requirements. In the north of China,unique ideas for painting wood fences the floor water content is 12%, and in the south, the floor moisture content should also be controlled within 14%. Distributors of general wooden floors should have a water content meter. If they are not, they will not pay attention to the moisture content. At the time of purchase, the moisture content of the wooden floor selected in the exhibition hall shall be measured first,material for covering boat cabin entry stairs and then the moisture content of the wooden flooring of the same species and the same specifications of the unopened packaging shall be measured. If the difference is ±2%, the moisture content may be considered as qualified.
2. Observe the accuracy of wooden floor
After unpacking the wooden floor, 10 or so free hand-assembled units can be taken out. Observing the mouthpieces of the enterprises and assembling the gaps,cedar fencing vs vinyl fencing the height difference between adjacent boards can be obtained.
3, check the defects of the substrate
First check whether the same species, whether confusion, whether the floor dead, live, cracking, decay, bacteria and other defects. As for the color difference of the floor,hard easy maintenance wood flooring since the wooden floor is a natural wood product, there are objectively chromatic aberrations and non-uniform phenomena, which cannot be avoided. And the feeling of returning to nature after paving the solid wood floor is in its natural color and pattern. If excessive pursuit of the floor has no color difference,are composite interior door frames good it is unreasonable, as long as it can be adjusted slightly when paving.
4, select the board surface, paint quality
The key to look at the finish is the film finish, no bubbles, paint leakage, and abrasion resistance.
5, identify wood species
At present, the names of tree species on the market are very confusing. Due to the different growth environments of the wood, the materials of the same tree species are slightly different due to the origin,parquet flooring dubai ace hardware and the raw material prices are not the same. However, it is not the imported material that is better than the main material of the country. There are many kinds of trees in our country. With abundant resources, tree species in many regions are both good and the price is lower than that of similar imports. Some manufacturers promote the sale of wood with a variety of names that do not meet the science of wood, such as: cherry wood,outdoor playground borders rosewood, gold does not change, jade sandalwood and other names; what is more, low-grade high-grade wood, Consumers must not be confused by the name and make clear materials so as not to be fooled.
When buying wooden floors, it is best to buy brands with good reputation and high reputation. In addition to quality assurance, the products usually have a certain warranty period, and warping, deformation, cracking and other problems occur during the warranty period. Manufacturers responsible for repair, change, can remove the worries of consumers.
6, determine the appropriate length, width
Solid wood flooring is not the longer and the wider the better, it is recommended to choose the short length of the floor, not easy to deformation; length,groove living wall panels by bright green width of the wood floor is relatively easy to deform.
7, decided to lay the construction unit
The length of the floor life, in addition to the quality of the floor itself, the paving part is very important, so it is recommended that consumers buy which of the floor to please which laying,lest production companies and decoration companies to push each other responsibility.
