09-06-2016, 09:38 AM
Before floor installation need to do the ground was dry, smooth, no obvious bump at. Ground to determine the pipeline, and crossed indicated. Bedroom door to step aside during the construction of wood flooring installation size (usually plus keel thickness of the floor thickness). Acceptance must be carried out after the arrival of the wooden floor, cheap park benches for sale, including: whether the consistent and ordered goods, packing, quantity, grade, color, plate surface is important to note, in particular, whether the floor corner bump phenomenon. Maintaining the overall level ground and thoroughly cleaned, a process will be easy the next.
Construction crossed, using ink lines crossed, keel spacing depending on the length of the floor, depending on the length of the floor is based on the principle of sharing, but a maximum 400mm; keel length spaced 400 ~ 450mm shells a line position. A cross was punched dotted line (depth of the hole is 40 ~ 60mm), and then driven into the cork, privacy wooden fence panels average cost 8 ft panel, cork to completely swell hole, and to clean up the ground again. Keel material is generally dried pine needles, nails keel fixed to the ground. Keel laying, need to be fixed after the leveling process is completed, the entire surface of the keel need a level surface (pavement liner required, can be laid on this basis).
Keel laying damp proof membrane, moisture-proof membrane interface for an overlap 200mm. Middle keel spacing evenly sprinkle some of pest control agents. Dedicated flooring nails, in the direction of 45-degree angle to the floor with a fixed keel, floor mounted with each contact to be fixed keel, floors and walls should be left 8 ~ 10mm rise contraction joints, best wpc products suppliers. After the wood floor coverings, the installation connector (buckle with flat buckle, height difference buckle, buckle and shut sun angle bar) and baseboard. Although basically wood workers will have to install, but to better understand what is not bad, oh easier supervision.
Construction crossed, using ink lines crossed, keel spacing depending on the length of the floor, depending on the length of the floor is based on the principle of sharing, but a maximum 400mm; keel length spaced 400 ~ 450mm shells a line position. A cross was punched dotted line (depth of the hole is 40 ~ 60mm), and then driven into the cork, privacy wooden fence panels average cost 8 ft panel, cork to completely swell hole, and to clean up the ground again. Keel material is generally dried pine needles, nails keel fixed to the ground. Keel laying, need to be fixed after the leveling process is completed, the entire surface of the keel need a level surface (pavement liner required, can be laid on this basis).
Keel laying damp proof membrane, moisture-proof membrane interface for an overlap 200mm. Middle keel spacing evenly sprinkle some of pest control agents. Dedicated flooring nails, in the direction of 45-degree angle to the floor with a fixed keel, floor mounted with each contact to be fixed keel, floors and walls should be left 8 ~ 10mm rise contraction joints, best wpc products suppliers. After the wood floor coverings, the installation connector (buckle with flat buckle, height difference buckle, buckle and shut sun angle bar) and baseboard. Although basically wood workers will have to install, but to better understand what is not bad, oh easier supervision.
